This luxury twelve watch winder has the following features:
- Digital Touch screen control
- 6 Individually programmable rotors (each holding 2 watches)
- Japanese Mabuchi motors
- Multi directional winders (CW, CCW or alternately CW/CCW)
- Variable Turns Per Day (650, 750, 850, 1000, 1950)
- LED display
- Digital display
- Ultra quiet motors
- AC mains powered. UK adapter normally supplied but a US or European adapter also available and shipped by default if the order is going to one of these areas i.e. if you live in North America we send you a US adapter or if you live in the EU we will send an EU adapter
- All housed in a stylish lockable display case measuring 33.5 x 26 x 46cm
Twelve Watch Winder Information
The Barrington 12 watch winder is a compact and stylish solution for anyone with a substantial watch collection. The unit is housed in a black high gloss finished cabinet with a clear perspex door and LED downlights set at a slight reclining angle to allow your watches to be displayed while they are wound. Each of the six large rotors can comfortably accommodate two watches of approx 48mm and each one can be individually programmed from the LCD control at the base of the unit. The entire unit is lockable for extra security and runs from AC mains power with the adapter supplied. Measuring just 46cm tall and 26cm wide by 33.5cm deep, this is a compact and elegant unit for your watch collection.
Your purchase on this website is covered by the Distance Selling Regulations and we will be happy to offer you a refund within 14 days if you are not entirely satisfied. Please return the item to us at Galty Ventures Ltd., Unit C1C Comet Studios, De Havilland Court, Penn Street, Amersham HP7 0PX. If there is a fault with the item then we will pay the return postage but if not we must ask you to pay for return postage. In addition we guarantee the quality of all our winders for 12 months from the date of purchase with a "Back to base" warranty. This means in the rare instance that you may encounter a problem with your winder within that period, please email us at firstname.lastname@example.org or call us on 01494 410126 with details and we will make arrangements to resolve the situation or will accept the winder back to be repaired/replaced as appropriate.
This winder operates on a basis of gentle rotation to wind watches. Older generation Watch Winders were programmed to be always on (i.e. rotating without a pause) in an effort to wind the watch as quickly as possible. This can lead to over-winding of a watch and potential damage to the main spring. Gentle rotation ensures a consistent movement over a longer period of time that won't over-wind your watch.
When initially turned on the rotor turns for 1 minute before pausing. The length of the pause is determined by the Turns Per Day setting (a lower TPD setting will mean a longer pause and vice versa) and once it is completed the rotor turns again for just 1 minute. This cycle continues silently for 12 hours, then rests for 12 hours, before beginning again and so on until the winder is turned off.
If the Direction setting is set to clockwise then the rotor will always rotate in a Clockwise manner; the same principle applies if the Direction setting is set to Anti-Clockwise. However, if the Direction setting is set to the third setting, Alternately Clockwise/Anti-Clockwise, the first 1 minute rotation will be Clockwise, the next 1 minute rotation will be Anti-Clockwise and so on, ensuring your watch gets a balanced, yet gentle, rotation.